01227 712222

Vango AirAway Kela III Low 2017

  • Vango AirAway Kela III Low
  • Vango AirAway Kela Low III Floorplan
£439 (20% off)

Product Information

RRP £620

Perfect for Volkswagon T4's and T5's

Vango AirAway® Structure

Sentinel Pro 420 Fabric - A high quality 420D double ripstop polyester fabric

Attaching Height: Designed to fit between 180 - 210cm

Pack Size: L78.0 x H35.0 x W37.0cm

Weight: 17.25kg



The massively popular Kela III Low inflatable drive away awning is the best selling awning in Vango's freestanding awning collection and has been stylishly designed to compliment your campervan or motorhome.

It comes with features such as bracer beams and storm straps and has been made using Vango's high quality 420 double ripstop Sentinel Pro material to ensure the Kela III Low keeps its status as one of the best drive away awnings available.

The connecting tunnel between the awning and vehicle features side doors on both sides which creates a perfect storage area and also a great place to take off muddy shoes meaning the awning and your motorhome can stay clean and dry.

The Kela III Low features Vango's pantented Tension Band System which prevents lateral movement of the awning in windy weather conditions but can be tucked away into its own storage pockets in normal conditions.

The Vango AirAway Kela III Low Driveaway Awning is an inflatable awning that is designed to fit vehicles between 1.8 and 2.10m in height,  making it perfect for Volkswagon T4's and T5's.  The Vango AirAway no pole structure will appeal to anyone going on a touring holiday or a short break away.  Using robust inflatble beams in pace of poles Vango driveaway awnings can be attached and erected easily.  This high quality awning can be full pitched in under 10 minutes.

This awning only has 2 inflatable beams each of which takes under 2 minutes to inflate.  Each AirBeam model has been tested in wind speeds of 75mph so you can be assured that they will stand up to even the most adverse weather conditions.


Webbing straps
Velcro tabs
Pre-attached kador (most popular)

The canvas flysheet is made from high quality Sentinel Pro 420 denier fabric making it very robust and durable.  It also has a hydrostatic head of 6000mm and fully taped seams, so you will be perfectly waterproof whatever the weather.

The living area on the AirAway Kela III Low measures 3.1 x 2.1m and features a detachable two berth inner tent.  It has a fully sewn-in waterproof polyester groundsheet which helps with insulation and has two doors (front and side) which each have a secondary mesh door which can be used to cool the awning down in hot weather and still keep the insects out.
The area between the living area and vehicle now has a door on each side so if you have wet shoes you don’t have to go through the living area and get it dirty to get to the vehicle.


  • When you have chosen your spot and parked your vehicle, lay the awning out in position alongside.
  • It’s best to attach the awning before inflating.  Once you have attached the awning, using one of the options mentioned above, peg the back two corners at the base of the vehicle and pull the awning out, so that the sides are at right angles to your motorhome, then peg out the front two corners.
  • You are now ready to inflate your awning.  Using the pump provided, inflate the beams starting with the beam closest to the vehicle and work your way forward.   Screw the valve into the AirBeam and inflate to 7 PSI, once the beam is fully inflated screw the cap on firmly.
  • Once the AirAway Awning is fully erect, check that the groundsheet and flysheet are evenly tensioned, if not, simply re-peg to correct it.  Then peg out the remaining pegging points and guylines, making sure that you don’t over tighten.
  • The AirAway is supplied with bracer beam to increase tension in the roof.  These have Velcro tabs at each end and can be attached to the main beams.  There is a slight curve in the bracer and it should be attached so that this curve is facing upwards into the roof.
  • Finally, add your inner tent if required.
  • The whole pitching process shouldn't take more than 10 minutes.
Height Designed to fit vehicles 1.8 - 2.1m in height
Flysheet Vango Protex® 420D Double Ripstop
Frame AirBeam technology (no poles)
Weight 17.25kg
Hydrostatic Head 6000mm
Pack Size L78.0 x H35.0 x W37.0cm
Pitching Time 10 Minutes
Pump Included


Features of the Vango Air Away Kela III:

  • Vango Airbeam™ 'No Poles' Technology
  • NEW Airspeed valve and position
  • Vango Protex® 420D Double Ripstop 6000HH
  • TBS® II - Tension Band System
  • Sewn in Polyester groundsheet
  • Fully taped seams
  • Large diamond clear PVC windows
  • Vango Airzone - high and low level vents
  • Connecting door
  • Bracing beam included
  • Detachable storm straps included
  • Pre-attached 6mm Kador strip
  • Standard height vehicles 1.8m - 2.1m
  • Rear porch rolls away when not in use
  • Velco roofbar attachment tabs
  • Rock pegs included
  • Double action hand pump included
  • Wide mouth carry bag
  • Fire resistant to European standard EN5912



© Copyright 2017 WM Camping